Rcbs High Capacity Case Trimmer Kit Bedienungsanleitung PDF herunterladen (Seite 3)

- 3 -

• Store primers and powder beyond the reach of

children and away from heat, dampness, open flames

and electrical equipment. Avoid areas where static

electricity is evident.

• Do not use primers of unknown identity.

• Dispose of unknown primers in accordance with

applicable regulations.

• Keep primers in the original factory container until

ready to use. Return unused primers to the same

factory packaging for safety and to preserve their

identity. Primer packaging is designed to provide safe

storage.

• DO NOT store primers in bulk. The blast of just a few

hundred primers is sufficient to cause serious injury to

anyone nearby.

• DO NOT force primers. Use care in handling primers.

• DO NOT have more than one can of powder on the

bench at one time. Powder cans should be stored

away from the bench to avoid picking up the wrong

one.

• DO NOT use any powder unless its identity is

positively known. The only positive identification is the

manufacturer's label on the original canister.

Discard

all mixed powders and those of uncertain identity.

• If you use a powder measure, replace the lids on both

the powder hopper and powder can after the powder

hopper has been filled.

• When using a powder measure, settle the powder in

the powder hopper before charging any cases. Throw

and check the weight of at least ten charges. This will

assure you that the correct powder charge is being

thrown.

• When you finish a reloading session, pour any

remaining powder back into its original factory

container. This will preserve the identity and shelf life

of the powder.

• DO NOT smoke while reloading.

RECORD KEEPING

• Keep complete records of reloads. Apply a descriptive

label to each box showing the date produced, and the

primer, powder and bullet used. Labels for this

purpose are packed with SPEER bullets.

• Never attempt to guess at the identity of your

ammunition.

Because RCBS has no control over the choice of components, the manner in which they are assembled, the use of this

product, or the firearms in which the resulting ammunition may be used, we assume no responsibility, expressed or

implied, for the use of ammunition reloaded with this product

UNPACKING

Refer to the list below to Identify parts as you unpack

your High Capacity Case Trimmer Kit.

• Parts bag #1 – Diagram 1

• .408 cal Pilot

• .416 cal Pilot

• .500 cal Pilot

• Parts bag #2 – Diagram 3

• Handle Assembly

• 10-32 BHCS

• High Capacity Case Trimmer Assembly – Diagram 2

1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare

Rcbs High Capacity Case Trimmer Kit Bedienungsanleitung Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Werkzeug Rcbs High Capacity Case Trimmer Kit